Sharp Washer Error Codes

Complete Troubleshooting & Diagnostic Guide

Water Supply & Drain Errors
E11
Water Inlet Issue
  • Ensure water faucet is fully open.
  • Inspect inlet hose for kinks or blockage.
  • Clean inlet filter screen.
  • Test water inlet valve operation.
E12
Drain Error
  • Inspect drain hose for blockage.
  • Clean pump filter and drain trap.
  • Check drain pump operation.
  • Replace drain pump if defective.
Door System Errors
E13
Door Lock Failure
  • Ensure door closes completely.
  • Inspect door latch and switch assembly.
  • Check wiring to door lock mechanism.
  • Replace door lock if faulty.
Motor System Errors
E21
Motor Fault
  • Inspect motor wiring connections.
  • Check drum movement for obstruction.
  • Test motor resistance values.
  • Replace motor if defective.
E22
Motor Speed Error
  • Inspect tachometer sensor wiring.
  • Check motor control board operation.
  • Ensure drum rotates freely.
  • Replace tachometer or motor if needed.
Heating System Errors
E23
Heating Error
  • Test heating element continuity.
  • Inspect heater wiring connections.
  • Check thermal protection devices.
  • Replace heating element if faulty.
Water Level Sensor Errors
E24
Water Level Sensor Fault
  • Inspect pressure sensor hose for blockage.
  • Check wiring connections to sensor.
  • Test water level sensor operation.
  • Replace faulty pressure sensor if needed.
Important: If error codes continue after troubleshooting, disconnect power and contact a certified Sharp technician.